Stripping an Allen wrench isn’t as hard as you may think it is. Properly removing an Allen screw can save you from a lot of physical damage and money in the long run. If stripping is becoming a problem for you, then take care of the issue before it gets worse by performing the proper stripper removal. In this guide we’ll show you how to strip an Allen wrench with ease.
To start the stripping process, remove the nut from the end of the rail. You do this by loosening the nut enough that you don’t feel too much resistance when you turn the wrench clockwise. You may need to make a few turns to get the nut started properly. With the nut loosened enough, you can then remove the stripped rail from the nut. Repeat this step for the remaining nuts on the stripper rail.
Once your stripper rail is free of nuts, it’s time to do the actual stripping. Slide the stripper rail across the nut and clear the space between it and the nut. This will allow you to easily remove the strip. The amount of space that the stripper rail needs should be based on the size of the nut. You want to be able to get a good grip on the strip through the small gap.
You need to be sure that the strip is seated correctly. If there is any excess metal between the strip and the nut, you should clean it before continuing. Otherwise the stripper rail will actually come off while you are trying to fasten the nut back on. When you have the strip seated properly, then you can fasten it and continue with the fastening process. You may need to do a few more passes until the strip is completely seated.
When you are finished stripping, you can take the stripped ends and bend them toward the open space on the stripper rail. This will help you secure the strip in place. With this new stripper rail in place, you are ready for some final striping. Take your time with this step, because you do not want any of the metal on the ends to ever come into contact with your skin. This could potentially cause a scar.
When you are done stripping, you can simply leave the stripping or you can reattach the nut to the end of the stripper rail. If you decide to go the easy way, all you need to do is take off the nuts holding the strip together and attach the strip to the end of the stripper rail. For those who want the more artistic route, they can strip and glue the strip to the end of the stripper rail in various creative ways.
When stripping, if you find that you are at a loss as to what to do next, you can always call up your favorite stripper and see if she would be willing to help. Most strippers have their own stripper girls. If she would rather show her clients how to strip for them, all she has to do is ask. She may even be happy to come along as you take the stripper rail apart. Some strippers will give a little tip, while others will ask you to do a really good job of stripping theirs.
After stripping the stripper rail, you can always take it apart again. All you have to do is take apart the nuts holding the strip together and put them back together like you did when you were putting the whole thing together. When you strip a stripper rail, you can get really creative and show your friends how you really do stripper moves. Some girls will even let you do a little modeling and dance for them right before you perform for them. Some girls might even let you spend the night at her house as a favor. You may find that stripping a stripper rail isn’t so bad after all.