Swimming pools are the most cooling options to beat the summer heat and get yourself enjoy the bright sunny days of summers. Especially pools at the backyard or the garden area are a great option to spend quality time with family and friends.
Having a proper pool pump maintenance will ensure your summer days go well without stressing out their damages.
Why is it vital to get your Pool Pump filter Cleaned?
Getting in touch with particles of dust, smoke, and other impurities the pool water can turn out to be cloudy, thus becoming unsafe for use. It primarily results in proper cleanliness. The problem can be controlled by cleaning the pool regularly and adequately.
Initially, this can be done by removing the debris and unwanted waste from the water and replacing the worn-out skimmer baskets. The pool should also be vacuum cleaned, and the level of chemicals needs to be adjusted accordingly.
The level of cleanliness can be examined by throwing a coin into the pool and observing it. If you can see the coin clearly, then the pool is clean.
The Pool pump plays a crucial role in keeping the water of the pool clean by removing the debris and other contaminated particles from it. The onga pool pumps provide one of the best pool pump cleaning options for cleaning the pool.
How often should the filter be cleaned?
A regular water cleaning routine is to be followed to keep the water of the swimming pool clean. The method should involve proper inspection and cleaning of the pump filter.
The cleaning frequency can vary depending upon the conditions prevailing the pool. For instance, the pool is constructed in a wooded area and is full of leaves and ferns; daily maintenance is needed in that case.
A professional can be hired for the process to maintain the pool firmly.
Analyzing the Type of Filter
Getting your pool pump filter cleaned helps in keeping the water clean and prevents clogging and burning of the pool pump. Mainly there are three types of pool pump filters, with different maintenance schemes.
The cartridge filter has the simplest structure and a simple cleaning process. Here, you just need to take off the cartridge and get off the visible dirt. If it’s dirty than expected, use a chemical filter cleaner to clean it properly.
To perform regular cleaning, you can backwash the sand filter to remove dirt and debris. A chemical cleaner can be put into use to clean the filter at least once in a year.
Diatomaceous Earth Filter
Also known as the DE filters the Diatomaceous earth filters can be cleaned by using a filter cleaner that changes the flow of water. A hose can also be used to rinse off the filter grids and the manifold. After the selection of the appropriate equipment is made, follow the required procedure by adding the DE powder (Clay like substance) that filters the pool water appropriately.
The cartridge and the DE systems save water and provide effective cleaning in comparison to a sand filter.
So it is better to replace the sand filter by any of the two, to ensure the best results.
Maintaining the Pool Pumps
Here are some of the common problems related to pool pumps and filters.
- Sudden Decrease in the flow rate of water
Variation in the flow of water can be a problem. It can probably be caused due to the obstructions in the supply line, thus holding the water flow and preventing it from getting pulled by the pressure of the pump.
To overcome this problem quickly shut off the pump to prevent overheating or instant burning. Check for any kind of blockage both in the skimmer baskets and the skimmer.
- Leakage in the Pool Pump
A decayed seal around the pump shaft could be a reason for the leakage of the pump. It can be treated by getting the seal replaced as per the instructions of the pool owner’s manual.
- Noise in the Pool Pump
Noise is another common problem in the swimming pools. It can be caused by a new pump, which is oversized and trying to discharge more amount of water than required. Another reason could be some particle jammed inside the impeller of the pump that is being used for a long time.
The problem can be controlled by correcting the size of the piping system since it is oversized. In case of an old pump, check the impeller and remove the obstructions as per the owner’s manual.
- The pump is unable to pump the water
There can be a time when the swimming pool pump is running but is unable to pump water.
One of the key reasons for this can be a low level of water in the pool or impeller of the pump damaged from the interior. Other reasons can be clogging in the filter or air leakage in the intake lines.
To avoid the problem, shut off the pump immediately if it is hot to avoid burning. Check the level of water and add more if required.
Check the filter get it cleaned or replace as per the requirement. If still, it happens not to be working, call for a mechanic to check for air leaks or the impeller damage.
As far as the pool defects and repairs are concerned, the above guide will surely help prevent your swimming pools from getting damaged. Maintain the pumps carefully according to the manual.
Follow the simple steps to have your swimming pool pumps work consistently without any defect.